NANOPRO Nano Coating 9h For Paint Ceramic Glass Shoes Textile Car Cabrio

Description

NANOPRO CERAMIC FORMULA-X N12
Nanopro Ceramic Formula-X N12 is long lasting nano ceramic protective coating designed for cars and motorcycles. This coating can be applied on painted and varnished surfaces, plastics and metal.
PACKAGE CONTENT:
Nanopro Ceramic Formula-X N12 (40 ml);
microfiber cloths (2 pcs.);
coating aplicator (3 pc.);
protective gloves (2 pcs.);
application manual.
Qualities:
Enhances the hardness of the surface by creating additional protection against minor scratches.
Smoothens minor scratches; removes the holograms.
Provides the surface with very strong hydrophobic properties and with the “easy cleaning effect”. The angle of a contact with water is more than 100 degrees therefore the surface remains clean for much longer period of time.
Significantly highlights the color of paint and provides it with greater shine. Does not attract dust.
Protects the surface from environmental impacts, such as acids, alkalis (resistant to pH2-pH12), road salts and UV rays. It also protects the surface from aging and provides it with additional protection from corrosion.
The coating is resistant to changes of the temperature from -30 °C to 150 °C.
Preparation of surface.
If car is waxed, remove wax using Wax Remover. Wash the car carefully. Make sure there is no washing products (shampoo, dirt solvent) left on the surface. It is recommended to coat polished surface of a car if you want to get a better result. If you have polished the car, make sure to wash it again. Make sure there is no water left in the spaces between the car parts. It is recommended to remove the remaining water using the compressed air jet. It is also recommended to remove dirt and fat using Pain Prepair.
Coating of surface.
Do not apply the coating in direct sunlight. Proper temperature for coating is from 5 °C to 25 °C. While coating, use the nitrile gloves that are in the set. Hold the applicator by the solid part. Put the application cloth onto the soft part of the applicator (nonwoven fiber cloth). Open the bottle and wet the application cloth in different spots. Cover the surface evenly; make sure that you did not leave uncovered spots. It is recommended to cover the area of 1x1 m at the time. If the temperature is higher than 25 °C, cover the smaller area. The surface must be polished in 60 seconds after coverage. If the surface gets into contact with water, immediately clean it and repeat the coating.
Continue coating areas up to 1x1 m until the full surface of the car is covered. After covering each area, polish it again with micro fiber cloth and make sure there are no unpolished spot left. If there is an unpolished spot and it does not get polished with any effort, use paint polishing paste. Cleaned area must be covered again.
ATTENTION!
It is recommended to keep the surface in higher than 18 °C temperature for 24 hours and prevent it from getting into contact with water. Depending on the temperature of the environment, the coating fully hardens in 48-72 hours.
Covered area:
40 ml - 8 m2.
NANOPRO N02 CARCARE CERAMIC COAT 40ML
NANOPRO CarCare Ceramic N02 Coat Body Protection Nano Coating For
Car Paint
After covering the body NANOPRO N02 CERAMIC COAT, your car:
Longer stay clean;
Will become more resistant to scratches;
Will gain long-term protection against UV, acid, alkali, salt, bird droppings;
Will get a healthy, deep gloss varnish;
Ceramic Coat NANOPRO product is intended for professional coating and having unique characteristics cause the car body durability. Car takes the rich glow from becoming resistant to scratches (9H), salt, bird droppings, insects and corrosion. Slower mud formation in the body, much easier maintenance, it is enough rinse with water under high pressure. This product is designed according to the Lithuanian inclement weather and road salt used in mixtures, it creates an excellent protection caring car body durability.
Product Details
This product is designed according to the Lithuanian inclement weather and road salt used in mixtures, it creates an excellent protection caring car body durability. The special formula allows the surface to create a stable and dense protective layer that protects not only from the salt, but also from bird droppings, acid rain and UV rays (glass cover can not be the measure
Surfaces coated with this tool, it is easily cleaned and maintained, and therefore requires less effort and time.
Before using the product wash their car washing using any silicone, wax or the like. The surface must be thoroughly degreased and completely dry. After covering a minimum of 6hrs car. It must be protected from water and debris, while facing harden. Yield is 5-10 ml / m2. Product safety from your car to 12 months. Up to 24 months.
Nano Coating For Convertibles Auto Cabriolet Roof Car Care Protection 100ml
NanoPro Cabrio Protection N09 - YouTube
Video will open in a new window
[isdntekvideo]
Very useful produt for car owners, providing hydrophobic effect for vinyl, tent-cloth roofs that gives permanent protection against water, dirt, salts etc.
This product  provides the waterproofing coating designed to protect convertible car roof. The product impregnates the surface with silane
nano
particles, thus preventing from penetration of dirt and pollutants into the interior. The material is resistant to water and substantially reduces the possibility of stains.
Repulsion of liquid through the hydrophobic effect on the covered material, facilitates the removal of spilled liquid from the impregnated surface and makes it difficult for stains to appear. The coating produces thin invisible layer around fibers, while not changing the material (the feel, look and degree of "breathing" stays the same). Nanocoating is resistant to condensation water, salt solutions, acid rain and dry cleaning. This product contains no harmful solvents for humans, is based on water and is safe for the environment.
Advantages:
easy to apply;
no more expensive cleaners required to clean the coated surface;
hydrophobic properties adds "self-cleaning" feature;
prevents water from soaking in;
stops dirt, salts from sticking to the surface;
does not alter colour;
air penetrability of the material stays the same;
can be used for vinyl, tent-cloth roofs;
long lasting (up to 18 months);
the possibility of re-coating, without any effect to the material,
neutrality to human health,
high level of penetration of fibers, causing the nanoparticles to cover every single fiber.
Available quantity:
100 ml
NANOPRO GLASS PROTECTION, 30ML
NANOPRO Glass PROTECTION is long lasting hydrophobic coating for glass, which lasts up to 3 times longer than common nano coatings for glass.
It improves visibility while raining and provides surface strong hydrophobic and easy to clean properties. This product creates an invisible, water-repellent and easily cleaned protective layer, which improves visibility during the rain. Coating makes window cleaning easier from bugs, ice or other dirt.
During the snow or rain, necessity of wipers decreases. Improved visibility increases safety on the road. At speed above 65 km/h, wipers are almost unnecessary. In winter, the ice is removed from windows much faster and easier. NANOPRO Glass PROTECTION coating is suitable for all car windows. This product is also suitable for trucks, busses and motorcycles.
Properties:
long lasting coating (lasts more than 12 months)
last up to 3 times longer than common nano coatings
does not change color of surface and is completely invisible
better visibility during the rain
higher safety on the road
Preparation of surface.
surface has to be clean, dry and oil, grease free. If glass is waxed, clean it with Wax Remover and wash with water. It is recommended to clean glass with paint prepare before coating.
Usage of product:
using special application cloth buff coating into the surface. Repeat buffing process several times without using additional coating. Wait for 5 minutes and polish the surface with cloth. Application temperature should be more than +5⁰C. Protect surface for 4 hours from water.
CAUTION:
do not apply coating on direct sunlight. Keep container well closed. Use in  well ventilated area. Keep out of reach of children.
Covered area:
30 ml covers up to 8 m2 surface area.
NANOPRO FOR TEXTILES AND FOOTWEAR, 100 ML
PROTECTION FROM STAINS AND WATER
Qualities:
protects the surface from fluid and oil penetration
the surface remains breathable
it does not change the surface color
it does not contain silicone, so the coated surface appears dull and does not have wet surface effect
no volatile organic compounds.
Nanotechnology impregnator for textiles makes fabric resistant to liquids and fat. It prevents the surface of the fabric from various stains.
The product is ideal for:
textile;
wool;
canvas products;
soft furnishings;
rugs;
coats (not suitable for syntheticproducts).
NanoPRO product creates invisible protective and tight layer from water and dirt.
Covered with this product, surface stays clean for a long time: coffee,
grease, water stains do not soak
into the Nano-protected surface, they are easy to clean using cloth. The surface becomes resistant to liquids and, at the same time, remains air - permeable. There is no trace of the product on the covered surface; fabric does not change its color; the product has no smell. It is a great help for people who raise children, have pets, want to protect light-colored furniture and prevent it from stains.
Preparation of surface and usage of product:
the surface must be completely clean, dry and free from grease or oil. Shake well and spray evenly distributed on the surface. Wait until surface will get dry.
CAUTION:
Once the product has been applied for 4 hours the surface should not come into contact with water. Suitable coating temperature +5°C - +40°C. Do not use it in a higher or lower temperature! Keep container tightly closed. Keep Container protected from direct sunlight and frost.
Covered area:
the 100 ml can cover 15 m2 depending on the surface.
Capacity
100 ml
Shipping prices to United States, Canada, Australia, Asia, Norway, Russia, Belarus, Switzerland - (registered shipment - priority with tracking number)
Shipping prices to European union countries - (registered shipment - priority with tracking number)
Tracking number will be provided.
Shipping times:
Australia, New Zeland - from 2 weeks up to 45 working days.
North America, Canada - from 7 up to 31 working days (sometimes can be little bit longer).
South America - from 7 up to 31 working days (sometimes can be little bit longer).
Asia - from 7 up to 31 working days (sometimes can be little bit longer).
Europe - from 7 up to 20 working days (sometimes can be little bit longer).
We accept payment by paypal only.
We will leave Positive Feedback after receive the payment, Please do not forget to give us and FIVE STARS on all of the Detailed Seller Ratings.
If you are not satisfied with your shopping Experience, Please contact us to get a solution before you decide to leave a neutral or negative feedback, We will try our best to solve any problems for you as soon as possible, thanks. We will provide you service as best as we can, cause the feedback and is what we are striving for. Please email me through "My Messages" or "Ask Seller Questions" if you have any question about our listings or your purchase.
View more great items